Installation And Maintenance; General Coverage; Unpacking; Pre-Installation Testing - Honeywell KHF 1050 System Installation Manual

Preliminary - Subject to Change Without Notice

1. General Coverage

This section provides service personnel with installation and
maintenance information pertaining to the following KHF 1050 HF
Communication System components:
KAC 1052 Antenna Coupler
KPA 1052 Power Amplifier
KRX 1053 Receiver/Exciter
NOTE:

2. Unpacking

Use care when unpacking KHF 1050 HF system components. Open
shipping cartons and carefully remove all items. Check that all
items on the packing list are included. Visually inspect each
component for damage incurred during shipment: dents, deep
abrasions, chipped paint, etc. If any component is damaged,
notify the transportation carrier immediately.

3. Pre-installation Testing

All components of the KHF 1050 HF system have been adjusted and
tested before shipment and pre-installation testing is not
required. If pre-installation bench testing of any unit is
desired, refer to bench test section of the applicable
maintenance manual. Refer to DESCRIPTION AND OPERATION, section
1.F., for a list of related maintenance manuals.
Revision 0
10640I00.SLK
KHF 1050 SYSTEM INSTALLATION MANUAL

INSTALLATION AND MAINTENANCE

For installation and maintenance information on the
Gables PS440 refer to the PS440 Control Display Unit
Installation Manual P/N 006-10655-XXXX.
For installation and maintenance information on the MCDU
Multifunction Control and Display Unit refer to the MCDU
Installation Manual P/N XXXX.
For installation and maintenance information on the
RM-855 Radio Management Unit refer to the RM-855
Installation Manual P/N XXXX.
N
23-10-09
Page 2001
Mar/2003