Operation - Honeywell KHF 1050 System Installation Manual

Preliminary - Subject to Change Without Notice
9.C. Lubrication
No lubrication is required. There are no moving parts that
require lubrication in the KHF 1050 HF Communication System.
9.D. Cleaning
The exterior of the units should be wiped with lint-free cloth
dampened with the approved cleaning agent, when deemed
necessary, depending upon environmental exposure and
intensity of use.
NOTE: Limit cleaning of equipment interiors to that required
10. System Maintenance Programs
10.A.System Maintenance Recommendations
10.A.(1) Perform a system performance check when a component of the
system is replaced or installed.
10.A.(2) To confirm satisfactory system operation a system
performance test may be performed as required.
10.A.(3) After major aircraft maintenance cycles a system
performance check should be performed.
Revision 0
10640I00.SLK
KHF 1050 SYSTEM INSTALLATION MANUAL
at bench overhaul.
N
23-10-09
Page 2046
Mar/2003