Ism Mode (Command : J P); Auto Configure (Command : J U) - HP LD4201 User Manual

[z][][Set ID][][OK][Data][x]
[Data]

17. ISM mode (Command : j p)

Used to select the afterimage preventing function.
Transmission
[j][p][][Set ID][][Data][Cr]
[Data]
Acknowledgement
[p][][Set ID][][OK][Data][x]

18. Auto Configure (Command : j u)

To adjust picture position and minimize image shaking automatically. It works only in RGB (PC)
mode.
Transmission
[j][u][][Set ID][][Data][Cr]
108 Appendix C Command reference
2nd Draft
0 : Normal (Power on and signal exist)
1 : No signal (Power on)
2 : Turn the display off by remote control
3 : Turn the display off by sleep time function
4 : Turn the display off by RS-232-C function
8 : Turn the display off by off time function
9 : Turn the display off by auto off function
1H : Inversion
2H : Orbiter
4H : White Wash
8H : Normal
ENWW