Registering A Display Via Serial Communication - HP LD4201 User Manual

Registering a display via serial communication

No extra search for displays is required when they are connected via serial communication using
HP Network Sign Manager. All displays connected via serial communication are displayed in the Add
Monitor pane.
A display connected via serial communication must have an ID assigned. HP Network Sign Manager
uses this ID to communicate with the display connected to the computer using the serial cable. To
control a monitor, select an ID of the monitor that you wish to control in the Add Monitor pane.
NOTE: If you select Monitor 0 in the Add Monitor pane, you can control all monitors regardless of
the IDs. However, controlling all monitors by selecting Monitor 0 prevents from receiving
acknowledgement (ACK) data from the monitors.
ENWW
2nd Draft
Display registration
59