Power Indicator; Ddc-Ci; Dfc; Dpm Select - HP LD4201 User Manual

There are four ISM methods available in the display:
Image Sticking Method
Normal
White Wash
Orbiter
Inversion

Power indicator

Power Indicator is used to enable or disable the power indicator of the display.

DDC-CI

DDC-CI is used to change the display DDC-CI setting.

DFC

DFC (Digital Fine Contrast)

DPM Select

DPM Select is used to change the display DPM (Dynamic Power Management) setting. Setting DPM
Select to On will automatically switch the display into the energy-saving mode when no image signal
is entered to the display.

Remote/Key Lock

Remote/Key Lock is used to lock or unlock the remote control and the keys on the display. Setting
Remote/Key Lock to Lock On will disable the remote control and keys on the display, preventing
you from controlling the display.

Sleep Timer

Sleep Timer is used to set the timer to go to the sleep mode. Once the specified time passes, the
display turns off automatically.

Auto Off

Auto Off is used to enable or disable the auto power off function. Setting Auto Off to On will turn off
the display if no image signal is detected for 10 minutes.

Power On Delay

Power On Delay is used to adjust the slider between 0 and 100 to set the delay time before turning
the display on. When turning more than one display at the same time, set Power On Delay of each
display to be different from each other to protect from overload.
66 Chapter 6 Installing HP Network Sign Manager
2nd Draft
Description
Does not use the ISM method.
Refreshes the screen into white to remove the ghost image.
Moves the screen up/down/left/right every 2 minutes to remove the ghost
image.
Inverts the current screen color to remove the ghost image.
ENWW