HP LD4201 User Manual page 49

Icon
36 Chapter 4 Operating the display
2nd Draft
Main menu Submenu
Key Lock
Set ID
ISM Method
DPM Select
Power Indicator
DDC-CI
DFC
Interface Select
Network Setup
IP Mode
Information
Factory Reset
TILE Tile Mode
Tile ID
Natural Mode
H Size
Description
Sets up the display so that it can only be used with the remote
control.
This feature can prevent unauthorized viewing.
Use to assign a unique Set ID NO (name assignment) to each
product when several products are connected for display.
Image Sticking Minimalization Method—avoids allowing a
fixed or burn-in image to remain on the screen for a long
period of time.
Display Power Management Select—Turns the power saving
mode On or Off.
Sets the power indicator on the front of the display to On or
Off.
To use this feature, select On; to turn off the feature, select
Off.
Digital Fine Contrast—To use this feature, select On; to turn
off the feature, select Off.
Sets up network connections.
RS-232C—Enables communication via Serial.
Network—Enables communication via Ethernet.
DHCP—Allocates and sets up IP automatically.
Manual—Sets up IP Address, Gateway, Subnet Mask, and
DNS Server.
Contains the Serial No., SW Version (MNT), SW Version
(LAN), IP Address, and MAC Address information.
Resets to the default factory settings.
Enlarges the screen and is also used with several products to
view the screen.
To use Tile Mode, the following must occur:
It must be displayed with several other products.
It must be in a function that can be connected to RS-232-
C OUT, RGB OUT, or DisplayPort OUT.
Selects the location of the Tile by setting an ID of 1–25.
The image is omitted by the distance between the screens to
be naturally shown.
To use this feature, select On; to turn off the feature, select
Off.
Adjusts the horizontal size of the screen taking into account
the size of the bezel.
ENWW