Using Movie List - HP LD4201 User Manual

Using Movie List

Use Movie List to play movie files on a USB storage device.
Information about using Movie List
MOVIE (*.avi) supporting file
Video format—MPEG1, MPEG2, MPEG4 (does not support Microsoft MPEG 4-V2, V3)
Audio format—Mpeg, Mp3, PCM, Dolby Digital
Sampling frequency—within 32k to 48 khz
Bit rate—32k to 320 kbps
Subtitle format—*.smi/ *.srt/ *.sub (MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt (DVD Subtitle
System)
If the video and audio structure of recorded file is not interleaved, either video or audio is
outputted.
Maximum FPS (frame per second) can be reached only at SD level. FPS is 25 FPS (720*576) or
30 FPS (720*480) depending on Resolution.
Files more than 25 FPS or 30 FPS or higher might not be played properly.
A video file name and its subtitle file name must be identical for it to be displayed.
Playing a video via a USB connection that does not support high speed might not work properly.
USB storage devices below USB 2.0 are supported as well, but they might not work properly in
the Movie List.
Files encoded with GMC (Global Motion Compensation) might not be played.
File
Extension name
mpg, mpeg, vob, dat
Avi, m4v
Movie selection and menu options
Play—Play the selected movie
Mark All—Mark all movies in the folder
Delete—Delete the selected movie item
Close—Close the pop-up menu
ENWW
2nd Draft
Video decoder
MPEG1, MPEG2
MPEG4-SP, MPEG4-ASP,
Xvid
Audio codec
AC3, MPEG, MP3, PCM
AC3, MPEG, MP3, PCM
Max. resolution
720 x 576 @ 25p
720 x 480 @ 30p
Using Movie List 45