Refresh; Message - HP LD4201 User Manual

The following describes how to reconnect a specified monitor to the network.
1. Select a display or display group to reconnect.
2. Click Connect.
NOTE: This function does not support a display connected with serial communication.

Refresh

Refresh is used to refresh the information in the selected control tab. For example, select the
Information tab, and then click Refresh. The information for the selected display or display group is
updated.
Similarly, to view the current display settings, select a display, select the A/V tab, and then click
Refresh

Message

Message is used to display a message you want on the display. You specify a message to be
displayed constantly in a specific position of the screen.
NOTE: Up to 60 characters are allowed in the message field. Only alphanumeric characters can be
entered.
The following describes how to use the Message function:
1. From Network Communication, select a display or display group on which you want to display
a message.
2. On the toolbar, click Message. The Message Setting dialog appears.
NOTE:
not appear.
3. Set the position, color, and content of the message displayed on the monitor
Item
Message Align
Message Color
Message Send
4. Click Send to send the created message.
Item
Send
Clear
Close
ENWW
2nd Draft
If a display or display group has not been selected, the Message Setting dialog does
Description
Sets the position where the message is displayed.
Selects a color of the message displayed.
Enters the content of the message displayed.
Description
Displays the created message on the selected display or display group.
Clears the text entered in the Message Send field.
Closes the Message Send dialog.
Toolbar
75