Connecting Lan (Hp Ld4210 And Hp Ld4710 Only) - HP LD4201 User Manual

Connect the HDMI to HDMI signal cable (not included) to the HDMI/DVI (1) connector on
the rear of the display and the other end to the HDMI connector (2) on the media player/
computer.
Figure 3-22
HDMI to HDMI?
2. Select an input signal.
Press the INPUT button on the remote control, select the HDMI/DVI input signal, and then press
the OK button to save.
Or, press the
then press the

Connecting LAN (HP LD4210 and HP LD4710 only)

The LAN input on the display can connect to a media player/computer, a router (switch), or an
Intranet. A LAN connection with the display establishes communication between your media player/
computer and the display, which enables the use of the HP Network Sign Manager program running
22 Chapter 3 Setting up the display
2nd Draft
Connecting the HDMI to HDMI signal
SOURCE button on the back of the display, select the HDMI/DVI input signal, and
AUTO/SET button to save.
cable[Author note:]Create graphic for
ENWW