Diagnosis; Controlling A Display; Power; Select Input - HP LD4201 User Manual

Diagnosis

The Diagnosis section shows display activities and failures.
Item
FAN
Lamp

Power

Temperature (inside)

Controlling a display

The Control tab allows you to control the selected display.
Power
You can turn the display on or off with a mouse-click under Power. The color of the button changes
depending on the display status.
Item
NOTE: When the display is turned off or in energy-saving mode, you can use Power on, Volume
control, Signal check, Fan check, and Lamp check functions only.

Select Input

Use Select Input to select an input type supported in the display.
NOTE: The input type supported in the display might vary depending on the model.

Volume

Volume is used to adjust the position of the slider to set the volume between 0 and 100.
ENWW
2nd Draft
Description
Fan status
Lamp status
Power status.
Temperature inside the display
Description
When the display is turned on
When the display is turned off
The display is in energy-saving mode
Display configuration
63