Ism Mode (Command: J P); Auto-Switch Input Select (Command: M I); Auto-Switch Input Select (Command: M J) - HP LD4235 User Manual

11: Japanese
12: Yue Chinese (Cantonese)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]

33. ISM mode (Command: j p)

To select ISM method for avoiding having a fixed image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08. Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]

34. Auto-Switch Input Select (Command: m i)

To set the Auto-Switch Input function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]

35. Auto-Switch Input Select (Command: m j)

To select the input source for auto switch.
* This command is only available when the Auto-Switch Input (auto) mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [ ][Data4][ ][Data5][Cr]
Data
1 to 5 (Priority 1 to 5)
60: RGB
90: HDMI(HDMI1)
94 Chapter 12 Controlling multiple products