HP LD4201 User Manual page 47

Icon
34 Chapter 4 Operating the display
Main menu Submenu
Expert 1 and
Expert 2
Control
Picture Reset
Screen
AUDIO Auto Volume
Draft
Description
Select from the following settings:
Dynamic Contrast—optimizes the contrast automatically
according to the brightness of the reflection.
Noise Reduction—removes the noise up to the point
where it does not damage the original picture.
Gamma—set your own gamma value. On the display,
high gamma values display whitish images and low
gamma values display high contrast images.
Black Level—adjusts the contrast and the brightness of
the screen using the black level of the screen.
Film Mode—adjusts the display, when watching a movie,
to the best picture appearance.
Color Standard—adjusts color.
White Balance—adjusts the overall color of the screen
to the feeling you want.
Color Management System—adjusts by using test
patterns. This does not affect other colors but can be
used to selectively adjust the 6 color areas (Red/ Green/
Blue/Cyan/Magenta/Yellow). Color difference might not
be distinctive even when you make the adjustments for a
general video.
Returns the Picture Mode to the default factory settings.
Select from the following screen video settings:
Resolution—to view a normal picture, match the
resolution of RGB mode and selection of PC mode.
(Function works in the following mode: RGB [PC] mode.)
Auto Config. (RGB PC input only)—automatic
adjustment of the screen position, clock, and phase.
(Function is available for analog signals only.)
Position—moves the screen position.
Size—adjusts the size of the screen.
Phase—adjusts the focus of the display. This item allows
you to remove any horizontal noise and clear or sharpen
the image of characters. (Function is available for analog
signals only.)
Reset—returns Manual Config. to the default factory
settings.
Adjusts uneven sound volumes across all channels or signals
automatically to the most appropriate level.
To use this feature, select On; to turn off the feature, select
Off.
ENWW