Abnormal State (Command : Z); Ism Mode (Command: J P) - HP LD4200tm - Widescreen LCD Interactive Digital Signage Display User Manual

Data 0 : Medium
1 : Cool
2 : Warm
3 : User
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0 : Medium
1 : Cool
2 : Warm
3 : User

16. Abnormal state (Command : z)

Abnormal State : Used to Read the power off status when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
0 : Normal (Power on and signal exist)
1 : No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
8 : Turn the monitor off by off time function
9 : Turn the monitor off by auto off function
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]

17. ISM mode (Command: j p)

Used to select the afterimage preventing function.
Transmission
58 Appendix C Controlling the Multiple Product ENWW