Using Auto-Sleep Mode - HP HC241 User Manual

Hide thumbs Also See for HC241:

Table of Contents

Using Auto-Sleep Mode

The monitor supports an OSD menu option called Auto-Sleep Mode that allows you to enable or disable a

reduced power state for the monitor. When Auto-Sleep Mode is enabled (enabled by default), the monitor will

enter a reduced power state when the computer signals low power mode (absence of either horizontal or

vertical sync signal).

Upon entering this reduced power state (sleep mode), the monitor screen is blanked, the backlight is turned

off, and the power light turns amber. The monitor draws less than 0.5 W of power when in this reduced power

state. The monitor will wake from sleep mode when the computer sends an active signal to the monitor (for

example, if you activate the mouse or keyboard).

You can disable Auto-Sleep Mode in the OSD menu. Press the

button on the monitor's front panel to

open the OSD menu. In the OSD menu select Power Control, select Auto-Sleep Mode, and then select Off.

Using Auto-Sleep Mode

Table of Contents

Hc241p