Table of Contents
Advertisement
HEIGHT ADJUSTMENT OF THE STOVE
The Scan 80-series has four adjustment screws under the stove. Use the adjustment screws to get the stove to stand
straight and level.
For Scan 80-2 and 80-4, open the door and adjust the screws.
For Scan 80-1 and 80-3 you can access the screws from the rear (1).
Drawing
10-05-2017
90580025
number:
jwa
SCAN A/S
DK-5492 Vissenbjerg©
Adjustment screws
E ( 1:1 )
Scan 80
Stove:
Material:
Articlenumber:
C:\Working Folder\Designs\Scan 80\90580028.idw
Path:
højdejustering
Name:
Weight:
N/A
Area:
Bagklap fjernes ved at løfte op og "vippe" øverste kant ud
E ( 1:1 )
16-05-2017
Date:
Adjust the screws so that
the stove stands straight
Stove:
Scan 80
Constructed/Changed by:
Material:
N/A
Articlenumber:
DK-5492 Vissenbjerg©
C:\Working Folder\Designs\Scan 80\90580028.idw
Path:
E
1
Remove the plate at the
rear by inserting the tip
of a flat screwdriver into
the little slot under the
plate and lift upwards,
where after the upper
edge of the plate can be
"tipped" out.
Bagklap fjernes ved at løfte op o
D
Drawing
90580028
number:
højdejustering
Name:
jwa
and level.
SCAN A/S
Weight:
N/A
Area:
D ( 1
Bagklap fjernes ved at løfte
Date:
16-
Constructed
N/A
DK
11
Advertisement
Table of Contents
