Table of Contents
Advertisement
UserLogs
/home/MasterControl/Jetty/webapps/root/UserLogs
The logging files are written to:----------->
These logs can be found on each of
the MCS cards and in order to view the
files the user can access them via a
Web-Browser at the following address:-
<MCS IP address>:8080/UserLogs
where the MCS IP address can be found
from Program Updater so in this example:-
192.178.1.0:8080/UserLogs
Once accessed the directory of user logs
appears as shown right:
The logs are saved as .txt files and has
a naming convention that allows easy
<YearMonthDay_HoursMinutesSeconds>_UserControlLog.txt
sorting of oldest to newest:---------------->
e.g. if started at 30th September 2015 at
15:14:39 then this becomes:
150930_151439_UserControlLog.txt
Once the selected log has been accessed
the data appears as a formatted
table showing Date, Time, Event Type,
Layer-Fader Number Sub Layer, Label,
Control and Value all ordered by earliest
timestamp first as shown right:
The table can then be searched and
analysed to find out the sequence of
events that occurred around the time of
interest.
CALREC
99
Putting Sound in the Picture
Advertisement
Table of Contents
