Table of Contents
Advertisement
Bolt-down'OB'stands
To provide the option of securing the
control surface to the floor by its stand,
as required when fitted in mobile or
outside broadcast units, the OB style
stand replaces the adjustable feet with
extra support and 2 x 11mm [0.43'] holes
in each foot plate, as shown in Figure 4.
Note that the OB stands are slightly taller
than their studio equivalents, sitting the
control surface 7.8mm [0.31'] higher.
CALREC
Putting Sound in the Picture
FIGURE 3 - STANDARD HEIGHT BOLT-DOWN OB STAND, END ELEVATION
122
[4.41"]
FIGURE 4 - BOLT-DOWN OB STAND, FIXING HOLES
660.0 [25.98"]
[2.91"]
75.8 [2.98"]
74
11
Advertisement
Table of Contents
