Table of Contents
Advertisement
SURFACE DIMENSIONS AND ASSEMBLY
The Artemis control surface can be
customised in terms of width and
fader count, and can be provided with
a number of stand and trim options.
Desk-topmounting
The control surface can be supplied with
no floor stand, or if supplied, the floor
stand can be removed allow for desk-top
mounting, as shown in Figure 1.
Floorstandoptions
Several floor stand types are available.
The standard 'Studio' type, as shown in
Figure 2 has adjustable feet for levelling.
The 'OB' version, shown in Figure 3
allows for the stand to be bolted to the
floor, typically for use in mobile or outside
broadcast units. Note the OB version
is 7.8mm [0.31'] taller than the Studio
version. Both the Studio and OB style
are also available with a reduced height,
sitting the console 40mm [1.57'] lower
than the standard versions.
10 ARTEMIS
Digital Broadcast Production Console
FIGURE 1 - NO FLOOR STAND FITTED, END ELEVATION
FIGURE 2 - STANDARD HEIGHT STUDIO STAND, END ELEVATION
122 [4.41"]
384 [15.19"]
129 [5.08"]
857 [33.74"]
74 [2.91"]
Control Surface
Advertisement
Table of Contents
