Table of Contents
Advertisement
MONITOR PANEL - MW5940
The MW5940 version of monitor panel
has all the functionality of the MY5972
with the addition of surround spill /
downmix faders for in-depth control
over surround paths and a joystick for
surround panning / output positioning
of mono or stereo paths.
Monitor panels fit in the control bed,
providing a dedicated set of the main
monitoring controls.
As well as monitoring controls, surround
spill, surround downmix and joystick
panning, this panel also provides On-Air
/ Rehearse condition switching, GPIO
assignable button & LED tallies, as well as
talkback keys.
If required, for example on a large
console or for multiple operators, multiple
monitor panels can be fitted. Each can
switch between controlling monitor 1
and monitor 2 as well as having access
to miscellaneous monitor / headphone
outputs.
Connections
An RJ45 labelled 'CTRL SYS' provides
the POE power and data connection from
a POE switch / port as determined by the
surface layout configuration in the Main
Application.
A 25 pin D-Type connector 'Reset &
Meter' is fed from the upstand reset panel
to take in the reset lines.
A second RJ45, 'Reset' passes on the
reset lines to the rest of the system
by connecting to a POE switch RST
connector.
The keyboard, mouse & VGA connectors
are for factory setup only.
CALREC
Putting Sound in the Picture
CUT
CUT
AFL
AFL
PFL
PFL
CONNECTOR LAYOUT
CTRL SYSTEM
RESET
CUT
CUT
AFL
AFL
PFL
PFL
VGA
RESET & METER
MW5940
KBD
MSE
105
Advertisement
Table of Contents
