Table of Contents
Advertisement
CORE DIMENSIONS AND MOUNTING
The Artemis Light processing core
is a 4U 19' rack mount unit designed
for installation into standard 19'
equipment bays.
Airflow
The core is cooled by fan assisted
convection. Air is drawn in through
inlets at the base/front and exits via 3
fans mounted to the rear of the core.
The speed of each fan is monitored and
System Status error reports are generated
for any failures. Air inlets and fans should
be left clear and unobstructed to ensure
air can flow through the card frame.
No clearance is required above or below
the core for cooling.
Support
The weight at the rear of the core should
be adequately supported to prevent
stress on the front racking angles. This is
particularly important when the units are
mounted in mobile installations. Calrec
will not accept liability for damage caused
by insufficient support.
Calrec supply adjustable rear support rails
with each Artemis light core that can be
fitted during installation if required. The
support rails can be fitted in different
positions depending on the depth of the
bay being used. Rear racking angles slide
over the support rails so the depth can be
adjusted to match the position of the rear
core fixings in the equipment bay.
34 ARTEMIS
Digital Broadcast Production Console
SIDE PROFILE VIEW - DIMENSIONS AND AIR FLOW
Air drawn in through inlets at the base/front and exits via 3 rear-mounted fans
SIDE PROFILE VIEW - DIMENSIONS WITH REAR SUPPORTS FITTED
OVERHEAD VIEW
Processing Core – Light
Advertisement
Table of Contents
