Using The Dual Charger - Polycom SpectraLink 8440 User Manual

Charging The Battery Pack

Using the Dual Charger

The Dual Charger (DCA39), shown next, is designed to charge the Battery Pack while keeping the
handset operational. You can charge one Battery Pack by placing the handset in the front charging bay,
and charge a second Battery Pack in the rear charging slot. When both slots are occupied, the front
charging bay has charging priority. The battery status icon on the handset indicates the charging status
of the Battery Packs. When the handset is fully charged or removed, the rear Battery Pack will begin
charging.
• Place the handset in the front slot, facing forward. Battery Packs snap into the rear charging slot.
The Dual charger has two LEDs. The top LED indicates the charging status of the Battery Pack in the rear
bay. The bottom LED indicates whether or not the handset is properly seated in the front charging bay.
The battery status icon on the handset indicates the charging status of the Battery Packs. LED status
indicators are listed in Table 2: Dual Charger LED Indicators, shown next.
May, 2011 | 1725-36720-001_RevA 97