Polycom Kirk 4020 DECT Features Manual

Polycom Kirk 4020 DECT Handset Feature Guide

Press the button for 1 second

When the handset is turned on the
symbol is shown in the lower left corner of
the display, if the handset is subscribed to a
system
 Press the
button for 4 seconds.
Note: When the handset has been outside
the coverage area, it can take up to 30
seconds before the handset is back on the
system after re-entering the coverage area.
 For making or receiving calls the handset has
to be subscribed to a system
display)
 Press the
button, the icon in the
display will flash until the connection is
established
 Dial the number onto the keypad
 Dial the number onto the keypad (long press
on the button will make a pause, if
necessary).
 Press the
button, the icon will flash
until the connection is established
 Press the > (BOOK) to enter the telephone
book
 Search for the number either by using the <
or > buttons or by pressing the first letter in
the name by using the digits 1 – 9
 Press the
until the connection is established
 To answer a call, press the
 To place a caller on hold, press the R button
 To retrieve the call, press R
(shown in
 While on a call press the R button.
 Dial the extension of phone number
 Wait for answers.
 Press
to hang-up
 While on a call press the R button
 Dial the extension of phone number
 Wait for ring tone.
 Press
to hang-up
button, the icon will flash
button
 Press R button then dial *68 and the
extension of phone which call is to be parked,
then hang up