Assembling The Brush (Tripla 60 2009 Bases) - COMAC Tripla 60B Use And Maintenance Manual

9. Unscrew the cap (2) of the canister in the compartment (in front of the
batteries) and fill it with liquid detergent in the manner indicated on the label
supplied with the machine. Check the screw cap is well closed, to avoid any
liquid leaking out while the machine is being used.
To regulate the water/detergent mixture, carefully read the "REGULATING THE
DETERGENT WITH THE CDS SYSTEM" paragraph.
ATTENTION: always use detergents whose manufacturer's
label indicates their suitability for scrubbing machines. Do not
use acid or alkaline products or solvents without this indication.
In addition, you are advised to always use low foam detergents.
Do not use pure acids or detergents with a stronger gradation
than that indicated on the label supplied.
ATTENTION: Protective gloves should always be worn before
handling detergents or acidic or alkaline solutions to avoid
serious injury to hands.

18. ASSEMBLING THE BRUSH (TRIPLA 60 2009 BASES)

1. Use the parking brake handle (1) to stop the machine.
2. Raise the base, moving it with the momentary bipolar two-way switch.
3. Turn the key of the master switch anticlockwise to the "OFF" position.
4. Remove the left side splash guard by loosening the knobs (1) on the base.
17
1