Assembling The Splash Guard; Assembling The Brush - COMAC SCRUB 45D Use And Maintenance Manual

ASSEMBLING THE SPLASH GUARD

For packaging reasons, the splash guard is supplied disassembled from the machine,
and must be assembled as shown in the figure.

ASSEMBLING THE BRUSH

1. Raise the base by means of the appropriate pedal.
2. With the base up, position the brush in line with the coupling on the machine.
3. Lower the base by means of the pedal.
4. Using the "man present" lever (6), the brush is automatically hooked up.
5. To alter the machine forwards speed, use the knob shown in the figure.
MACHINE PREPARATION
12 12
6