Australia/New Zealand; Safety; Table 34: Vcci Referenced Standards - Imagine communications Selenio VMG-14+ Hardware Setup Manual

VCCI regulations reference various national and internal standards and for clarity, the standards
utilizaed are provided in
Table 34. VCCI Referenced Standards
Referenced Standard
CISPR 22: Ed 6:2008
CISPR 16-1-1
Ed2.1:2006
CISPR 16-1-2
Ed1.2:2006
CISPR 16-1-4
Ed2.0:2007
CISPR 16-2-3
Ed2.0:2006
CISPR 16-4-2
Ed1.0:2003
ANSI C63.4-2003 and
ANSI C63-2009
Australia/New Zealand
Warning! This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adquate measures.
AS/NZS CISPR 22:2009: "Information technology equipment – Radio disturbance characteristics –
Limits and methods of measurement" (Class A)

Safety

The VMG-14+ has been certified and is in compliance to the following requirements:
IEC 60950-1:2005 (2nd Edition); Am 1:2009
•
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011
•
Selenio TM VMG-14+ Hardware Setup Guide
Table 34.
Description
Information Technology Equipment – Radio disturbance characteristics - Limits and
methods of measurement
Specification for radio disturbance and immunity measuring apparatus and method
– Part 1-1: Radio disturbance and immunity measuring apparatus – Measuring
apparatus.
Specification for radio disturbance and immunity measuring apparatus and methods
– Part 1-2: Radio disturbance and immunity measuring apparatus – Measuring
apparatus – Ancillary equipment – Conducted disturbances
Specification for radio disturbance and immunity measuring apparatus and methods
–Part 1-4: Radio disturbance and immunity measuring apparatus – Ancillary
equipment – Radio disturbances
Specification for radio disturbance and immunity measuring apparatus and methods
– Part 2-3: Methods of measurement of disturbance and immunity – Radiated
disturbance measurements
Specification for radio disturbance and immunity measuring apparatus and methods
– Part 4-2: Uncertainties, statistics and limit modeling – Uncertainty in EMC
measurements
American National Standard for Method of Measurement of Radio Noise Emissions
from Low Voltage Electrical and Electronic Equipment in the Range 9kHz to 40 GHz.
Safety
84