Fan Trays; Figure 9: Fan Trays And Fans; Figure 10: Fan Tray Leds; Table 5: Rj-45 Port Pinouts-Vmg-14+ Scm - Imagine communications Selenio VMG-14+ Hardware Setup Manual

VMG-14+ Chassis and Components
10/100 Ethernet Connector
Pinouts for the SCM RJ-45 port are provided in
Table 5. RJ-45 Port Pinouts—VMG-14+ SCM
Pin Description
1 TX+
2 TX-
3 RX+
4, 5 Unused pair
6 RX-
7, 8 Unused pair
Fan Trays
The fan trays operate continuously to provide cooling to the system and are monitored by the SCM. In
the event of a failure—such as a fan problem or removal of both SCMs—the remaining fans continue
to run at full speed. The fan trays are hot swappable field-replaceable units. The VMG-14+ chassis
contains two fan trays, which fit into the base of the chassis at the front. Each fan tray contains six fans
(Figure 9).
Figure 9. Fan Trays and Fans
Fan Tray LEDs
Fan Tray LEDs are located on the Fan Tray front panel
Figure 10. Fan Tray LEDs
Selenio TM VMG-14+ Hardware Setup Guide
Fan Tray 1
Table 5.
FRONT
Fan Tray
(Figure 10) and are described in
Fan Tray 2
Gen2 Release 1.4.0
Table 6.
21