Figure 31: Ac Power Supply Unit: Ejector/Insertion Lever (Close); Figure 32: Ac Power Entry Modules With Imagine Communications-Supplied Cords - Imagine communications Selenio VMG-14+ Hardware Setup Manual

Installation Instructions
Figure 31. AC Power Supply Unit: Ejector/Insertion Lever (Close)
Lever Up
(Closed)
Thumbscrew
4. Insert the thumb screw and turn clockwise to tighten it.
AC Power Entry Modules (PEMs)
Four AC PEMs are installed at the chassis rear, which contains sockets for up to four Imagine
Communications power
Figure 32. AC Power Entry Modules with Imagine Communications-Supplied Cords
AC Power Cord
Use only the AC power cords provided by Imagine Communications. Insert one into each applicable AC
PEM socket and plug it into the dedicated wall outlet near the installation rack. There are no circuit
breakers or ON/OFF switches. AC power is applied to the system directly from the site source.
Selenio TM VMG-14+ Hardware Setup Guide
cords.(Figure 32).
Imagine Communications power cords for VMG-14+ AC systems
Gen2 Release 1.4.0
REAR
46