Installation Instructions
Loading the Application Modules
Use the guidelines from
into the chassis.
Warning!
At the front of the chassis, any empty card slot must be fitted with a filler panel to maintain
proper air flow.
The system ships with rear slots 1 - 14 covered by RTMs. Do not remove these.
Network Processor Modules
Slot Assignment: Selenio VMG chassis-front, slot 1 and/or 2
Use the guidelines in
and NPM2 cards
Figure 33.
NPM or NPM2 Card
Front
Ejector
Thumbscrew
Selenio
TM
VMG-14+ Hardware Setup Guide
"Inserting VMG Modules—New System" on page
"Inserting VMG Modules—New System" on page 41
(Figure
33).
Thumbscrew
Gen2 Release 1.4.0
41, to re-insert the modules
to place and secure the NPM
Rear
47