Network Processor Modules; Figure 12: Npm Front Panel; Figure 13: Npm2 Front Panel; Table 7: Npm Models - Imagine communications Selenio VMG-14+ Hardware Setup Manual

Network Processor Modules

Network Processor Modules
The Network Processor Modules are the NPM and NPM2 cards. These modules share common physical
characteristics (Figure 12
in the following sections:
"NPM and NPM2 Interfaces" on page
•
"NPM and NPM2 LEDs" on page
•
"NPM and NPM2 Management and Serial Ports" on page
•
Figure 12. NPM Front Panel
Status Fault Reset
Hot Backup
Swap
Config
Figure 13. NPM2 Front Panel
Status Fault Reset
Hot Backup
Swap
Config
Table 7. NPM Models
Front
Name Panel
Label
Network NPM
Processor
Module
Network NPM2
Processor
Module2
Selenio TM VMG-14+ Hardware Setup Guide
and Table 7) which provide the interfaces, indicators and functions described
24.
24.
Not used
10 GigE
RJ-11
XFP1
XFP2
Serial
Port
Not used
10/100
(Management
RJ-11
Serial Port
Description
Purpose: receive and transmit MPEG-2 and
H.264 transport streams carried in an SPTS
and/or MPTS, encapsulated with UDP / IP or
RTP / UDP / IP over GigE or 10GigE in
GEN1 VMG:
• System management functions.
• Supports 1:1 module redundancy.
Identical to the NPM, plus packet inspection
for GEN2 VMG.
25.
1 GigE
SFP 1-4 SFP 5-8
1 GigE /10 GigE (Data)
SFP 1-4 SFP 5-8
System Capacity
• Up to two.
• At least one is
required.
Gen2 Release 1.4.0
10/100
baseT
Slot
Assignments
1, 2
23