Input / Output Interfaces; Redundancy; Table 22: Input/Output Interfaces; Table 23: System And Component-Level Redundancy - Imagine communications Selenio VMG-14+ Hardware Setup Manual

Input / Output Interfaces

Input / Output Interfaces
The VMG-14+ chassis contains no interface ports. Input/output interfaces described in this section are
associated with various modules, as listed in
Table 22. Input/Output interfaces
Interface
Ethernet
Fast Ethernet
Serial
SDI

Redundancy

Table 23. System and Component-Level Redundancy
Redundancy
Redundancy
Selenio TM VMG-14+ Hardware Setup Guide
Table
Type
2 x 10GigE, 8 x GigE interfaces - copper or
optical
4 x 10GigE, 8x GigE interfaces - copper or
optical
1 x 10/100Base-T control and management
interface
4x10/100Base-T control and management
interface.
1 x RJ-45 serial port
1x RJ-11 serial port
SDI out for testing
Module
•
All modules are hot-swappable.
•
1:1 NPM, NPM2
•
1:1 AMP
•
N+M VPM
•
N+M TCM, TCM2, TCM2+
•
N:1 AC Power
•
N:1 DC Power
•
Service level on one or all output programs.
•
Power supplies and fans.
22.
Applicable Modules
NPM, AMP
NPM2
NPM
NPM2
NPM, NPM2, SCM, AMP
NPM
TCM, TCM2, TCM2+
Gen2 Release 1.4.0
69