Npm And Npm2 Management And Serial Ports; Table 9: Npm Serial Reference - Imagine communications Selenio VMG-14+ Hardware Setup Manual

Network Processor Modules
Table 8. NPM Front Panel LED Description (Continued)
LED Name
Status
Config
Fault
Backup
Note: For a list of SFP and XFP modules approved for use with the NPM or NPM2, please refer to the
VMG release notes and/or Imagine Communications Customer Portal.
NPM and NPM2 Management and Serial Ports
The NPM and NPM2 provides one 10/100BaseT Ethernet interface with an RJ-45 connector, compliant
with IEEE-802.3ab. A serial console port with an RJ-11 connector is also provided.
Serial Console Configuration—NPM and NPM2
19200 baud
•
No parity
•
8 data bits
•
1 stop bit
•
no flow control
•
Serial Port Pinouts—NPM and NPM2
Table 9. NPM Serial Reference
Pin
Name
Number
1 No Connect
2 TXD
3 RXD
4 No Connect
5 GND
6 No Connect
Selenio TM VMG-14+ Hardware Setup Guide
Color/Condition Description
Red Chassis interface is in fault state.
Green NPM payload powered and out of reset.
Red FPGA configuration in progress.
Green FPGA configuration is done.
Red Fault.
Green In normal operation.
Red Standby.
Green In operation.
Gen2 Release 1.4.0
25