Ethernet Switch Agent Object - Hirschmann MACH 100 User Manual

EtherNet/IP
2.2.4

Ethernet Switch Agent Object

The Switch supports the Hirschmann vendor specific Ethernet Switch Agent
Object (Class Code 95
parameters with one instance (Instance 1).
For further information on these parameters and how to adjust them refer to
the Reference Manual „GUI" (Graphical User Interface / Web-based
Interface).
Attribute ID/Bit No.
Switch Status ID 01
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 16
Bit 17
Bit 21
Bit 22
Bit 23
Bit 24
Bit 25
Bit 28
Bit 29
Table 7: Hirschmann Ethernet Switch Agent Object
UM IndustProtocol
Release 9.0 02/2015
149) for the Switch configuration and information
H,
Description
DWORD (32 bit) RO
Overall state (0: ok, 1: failed) Like the signal contact.
Power Supply 1 (0: ok, 1: failed or does not exist)
Power Supply 2 (0: ok, 1: failed or does not exist)
Power Supply 3 (0: ok or not possible on this platform, 1: failed
or does not exist)
Power Supply 4 (0: ok or not possible on this platform, 1: failed
or does not exist)
Power Supply 5 (0: ok or not possible on this platform, 1: failed
or does not exist)
Power Supply 6 (0: ok or not possible on this platform, 1: failed
or does not exist)
Power Supply 7 (0: ok or not possible on this platform,
1: failed or does not exist)
Power Supply 8 (0: ok or not possible on this platform,
1: failed or does not exist)
DIP RM (ON: 1, OFF: 0)
DIP Standby (ON: 1, OFF: 0)
Signal Contact 1 (0: closed, 1: open)
Signal Contact 2 (0: closed, 1: open)
Quick Connect (1: ON, 0: OFF)
Temperature (0: ok, 1: threshold exceeded)
Fan (0: ok or no fan, 1: inoperable)
DIP Ring ports, 0: module 1 ports 1&2, 1: module 2, ports 1&2
DIP Configuration (1: enabled, 0: disabled)
DIP HIPER-Ring state (1: ON, 0: OFF)
Module removed (1: removed)
ACA removed (1: removed)
Hiper-Ring (1: loss of redundancy reserve)
Ring-/Netcoupling (1: loss of redundancy reserve)
2.2 EtherNet/IP Parameters
27