Table of Contents
Advertisement
1.4
Power supply
Two 3-pin 7/8" plugs are available for the power supply to the device.
For more detail see
Supply voltage on page
1.5
Ethernet ports
You have the option of choosing various media to connect to the terminal
devices and other network components:
Singlemode optical fiber
Twisted pair cable
You find information on pin assignments for making patch cables here:
Pin assignments on page
1.5.1
10/100 Mbit/s twisted pair port
This port is a 4-pin, "D"-coded M12 socket.
The 10/100 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX standard.
This port supports:
Autonegotiation
Autopolarity
Autocrossing (if autonegotiation is activated)
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Delivery state: Autonegotiation activated
The socket housing is electrically connected with the device housing.
1.5.2
1000 Mbit/s F/O port
Figure 1: IP67 plug as per IEC 61076-3-106.
The 1000 Mbit/s F/O port offers you the ability to connect network
components according to the IEEE 802.3 1000BASE-LX standard.
Installation BATOne
Release 01 01/2019
30.
18.
17
Advertisement
Table of Contents
