Hirschmann MACH 100 User Manual page 44

PROFINET IO
Configuring the port properties

For modular devices, slots 1 to n represent the modules. Within the slots,
the ports are shown as records.
For non-modular devices, the slots 1 to n represent the ports.
Configuring Alarms
 Right-click on one of the slots 1 to n and select Object properties.
 In the Properties window, select the "Parameters" tab.
 Select the desired alarms and close the window
Figure 15: Port properties
Special case: "LinkDown" alarm:
The LinkDown alarm is made up of the AND-link
– of the Hirschmann-specific status for connection errors and
– of the Simatic S7-specific option for the connection.
Activating the LinkDown alarm:
 Under Object properties, select the Parameter tab
(Hirschmann-specific).
Activate "Alarms" and select the option Generate diagnosis
alarm when link goes down under "Link state monitoring".
 Under Object properties, select the Options tab (Simatic S7-
specific).
To activate the link monitoring, select a fixed setting for the port under
Connection/Transmission medium/Duplex.
44
3.1 Integration into a Control System
(see figure 15).
UM IndustProtocol
Release 9.0 02/2015