Hirschmann MACH 100 User Manual page 40

PROFINET IO
 Give the Switch its name.
Click on "Assign Name".
 Click on "Close".
 In the hardware configuration, right-click on the Switch and select
Object properties.
Figure 11: Dialog for entering the object name (= name of the Switch) and the IP
parameter
 Enter the same device name here.
 Click on "Ethernet".
Enter the IP parameters.
Close the Ethernet input window.
 Click on "OK" to close the properties window.
The Switch is now included in the configuration.
40
3.1 Integration into a Control System
UM IndustProtocol
Release 9.0 02/2015