Hirschmann MACH 100 User Manual page 41

PROFINET IO
Configuring IO Cycle
 In the hardware configuration, right-click on the Switch and select
Object properties.
Figure 12: Dialog for entering the IO Cycle
 In the Properties window, select the "IO Cycle" tab.
 Under Update Time/Update time[ms]:, select the required
update time (in ms) for the IO Cycle
 Under Watchdog Time/Number of accepted update cycles
with missing IO data , select the required number for the IO
Cycle (see figure
 Click on "OK" to close the properties window.
UM IndustProtocol
Release 9.0 02/2015
3.1 Integration into a Control System
12).
(see figure 12).
41