PROFINET IO
Save the settings.
Click "OK" to close the Properties window.
Configuring Topology
Right-click on one of the slots 1 to n and select Object
properties.
Figure 17: Dialog for entering the topology
In the Properties window, select the "Topology" tab.
Under Port Interconnection/Local port, select the required
setting for the port
Under Partner/Partner port, select the required setting for the
partner port
Click on "OK" to close the properties window.
46
(see figure
(see figure
17).
3.1 Integration into a Control System
17).
UM IndustProtocol
Release 9.0 02/2015