APRILIA scarabeo 125 i.e. Service Station Manual page 185

SCARABEO 125 i.e. - 200 i.e.
WATER PUMP REFITTING
•
Fit the oil seal working from the fly-
wheel cover internal side and using the
specific special tool.
Specific tooling
020376Y Adapter handle
020456Y 24 mm Ø punch
020455Y 10-mm guide for oil seal on water
pump shaft
•
Fit the bearing working from the fly-
wheel cover internal side and using the
specific special tool.
Specific tooling
020376Y Adapter handle
020456Y 24 mm Ø punch
020455Y 10-mm guide for oil seal on water
pump shaft
•
Working from the flywheel cover exter-
nal side, fit the contacting seal using
the specific special tool.
Specific tooling
020700Y Water seal punch
•
Once a small quantity of Loctite 603 is applied on the bearing inner track, fit the pump shaft
together with the rotor, working from the cover external side.
CAUTION
MAKE SURE NO LOCTITE COMES INTO CONTACT WITH THE BALLS
•
Working from the flywheel cover internal side, lock every element with the safety ring.
•
Fit the water pump cover and tighten the 3 screws at 6 Nm.
See also
Top-up
Level check
Refitting the flywheel cover
Cooling system
COOL SYS - 185