SCARABEO 125 i.e. - 200 i.e.
Refitting the ub cover
•
Fit a new gasket.
•
Check that the two alignment dowels
are adequately positioned.
•
Place the hub cover.
•
Tighten the eight screws operating di-
agonally.
•
Fill with hub oil.
Locking torques (N*m)
Transmission cover EI fixing screws - M6x30
(8)
10 Nm (7.38 lbf ft)
Flywheel cover
Removing the hub cover
•
Detach the water pipe.
•
Undo and remove the eight screws.
Engine
ENG - 95