APRILIA scarabeo 125 i.e. Service Station Manual page 35

SCARABEO 125 i.e. - 200 i.e.
•
Stop the engine and let it cool down. This will allow the oil to settle into the crankcase and
cool down.
NOTE
FAILURE TO FOLLOW THESE OPERATIONS MAY RESULT IN AN INCORRECT READING OF
THE ENGINE OIL LEVEL.
•
Unscrew and pull out the measuring
cap-dipstick «1».
•
Clean the area in contact with oil with
a clean cloth.
•
Place without screwing the cap-dip-
stick «1» into its tube «2».
•
Remove the cap-dipstick «1» again
and read the level the oil reaches on
the dipstick.
•
The level is correct when it is close to
the MAX level marked on the measur-
ing dipstick.
•
Top-up if required.
TOP-UP
•
Pour a small quantity of oil through the tube «2» and wait approximately five minutes so that
the oil flows evenly into the crankshaft.
•
Check the oil level and top-up, if required.
•
Top-up with small quantities of oil, until the recommended level is reached.
•
At the end of the operation, screw and tighten the tap-dipstick «1».
CAUTION
DO NOT RIDE THE MOTORCYCLE WITH INSUFFICIENT LUBRICATION OR WITH CONTAMINA-
TED OR INCORRECT LUBRICANTS AS THIS ACCELERATES THE WEAR AND TEAR OF THE
MOVING PARTS AND CAN CAUSE IRRETRIEVABLE DAMAGE.
Maintenance
MAIN - 35