Engine
Refitting the flywheel magneto
•
Fit the flywheel paying attention to in-
sert the cotter adequately.
•
Lock the flywheel nut to the prescribed
torque.
Locking torques (N*m)
Rotor TEF fixing screw - M8x25 (1)
lbf ft) - Loctite 243
Refitting the starter motor
- If the O-ring is damaged, fit a new one on the
starter motor and lubricate it.
- Fit the starter motor on the crankcase and tighten
the 2 screws.
CAUTION
ADEQUATELY COUPLE THE MOTOR GEAR WITH THE
STARTER DOUBLE GEAR.
Locking torques (N*m)
Starter motor EI fixing screws - M6x25 (2)
(7.38 lbf ft)
Cylinder assy. and timing system
Removing the rocker-arms cover
•
Undo and remove the four screws.
•
Remove the tappet cover.
ENG - 102
SCARABEO 125 i.e. - 200 i.e.
25 Nm (18.44
10 Nm