APRILIA scarabeo 125 i.e. Service Station Manual page 79

SCARABEO 125 i.e. - 200 i.e.
AP8140665 Adapter for clutch assembly re-
moval
Pin retaining collar
- Remove the collar with the aid of 2 screwdrivers.
- Remove the 3 guide pins and the movable half-
pulley.
Removing the driven half-pulley bearing
- Remove the retainer ring using two flat blade
screwdrivers.
- Using a hammer and pin, knock the ball bearing
out as shown in the figure.
- Remove the bearing and the rollers with the spe-
cific extractor.
NOTE
REST THE HALF-PULLEY ON A WOODEN SURFACE TO
AVOID DAMAGING ITS THREADED BUSHING. ALSO DO
THIS UPON REMOVAL.
Specific tooling
020375Y 28 x30 mm Punch
020376Y Adapter handle
020439Y 17-mm guide for oil seal
Engine
ENG - 79