About This Manual; About This Motherboard - Supermicro X11SCD-F User Manual

About This Manual

This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X11SCD-F motherboard.

About This Motherboard

The X11SCD-F motherboard supports an Intel® Xeon E-2100 processor with up to 95W
in a LGA1151 socket. This motherboard features PCI Express 3.0, DDR4, USB 2.0, SATA
3.0, M.2 slot, with the Intel C246 chipset. The X11SCD-F is a 3U MicroCloud form factor
motherboard that provides maximum performance and higher power support. Please note that
this motherboard is intended to be installed and serviced by professional technicians only.
For processor and memory updates, please refer to our website at
com/products/.
Manual Organization
Chapter 1 describes the features, specifications and performance of the motherboard, and
provides detailed information on the Intel C246 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when installing the
processor, memory modules, and other hardware components into the system.
If you encounter any problems, see Chapter 3, which describes troubleshooting procedures
for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information on running
the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software program installation instructions.
Appendix C lists standardized warning statements in various languages.
Appendix D provides UEFI BIOS Recovery instructions.
Preface
3
Preface
http://www.supermicro.