Monitoring Functions / Messages; General Monitoring Functions / Messages - Siemens MICROMASTER 440 Operating Instructions Manual

Issue 10/06
3.20

Monitoring functions / messages

3.20.1

General monitoring functions / messages

Parameter range:
Warnings
Faults
Function chart number:
MICROMASTER has an extensive range of monitoring functions / messages which
can be used for open-loop process control. The control can either be implemented
in the drive inverter or also using an external control (e.g. PLC). The interlocking
functions in the drive inverter (refer to Section 3.1.2.3) as well as the output of
signals (refer to Section 3.6.2 or 3.7) for external control are implemented using
BICO technology.
The status of the individual monitoring functions / messages are emulated in the
following CO/BO parameters:
r0019
r0050
r0052
r0053
r0054
r0055
r0056
r0403
r0722
r0747
r1407
r2197
r2198
Frequently used monitoring functions / messages including parameter number and
bit are shown in the following Table.
MICROMASTER 440 Operating Instructions
6SE6400-5AW00-0BP0
P2150 – P2180
r0052, r0053, r2197, r2198
-
-
FP4100, FP4110
CO/BO: BOP control word
CO/BO: Active command data set
CO/BO: Status word 1
CO/BO: Status word 2
CO/BO: Control word 1
CO/BO: Supplementary (additional) control word
CO/BO: Status word – closed-loop motor control
CO/BO: Encoder status word
CO/BO: Status, digital inputs
CO/BO: Status, digital outputs
CO/BO: Status 2 – closed-loop motor control
CO/BO: Messages 1
CO/BO: Messages 2
3 Functions
221