Siemens MICROMASTER 440 Operating Instructions Manual page 190

3 Functions
Table 3-29
Parameter setting
P0810 = 722.2 requires P0703 = 99
P0810 = 2032.15
P0810 = 2036.15
P0810 = 2090.15
Table 3-30
Valu Command source (P0700)
e
1 BOP (keyboard)
2 Terminal strip
4 USS at the BOP link
5 USS at the COM link
6 CB at the COM link
190
Examples for settings of parameter P0810
Possible settings for parameters P0700 and P1000
Command source
Digital input 3
USS at the BOP link
USS at the COM link
CB at the COM link
Valu Setpoint source (P1000)
e
1 MOP setpoint
2 Analog setpoint
3 Fixed frequency
4 USS at the BOP link
5 USS at the COM link
6 CB at the COM link
7 Analog setpoint 2
10 No main setpoint + MOP setpoint
77 Analog setpoint 2 + analog setpoint 2
MICROMASTER 440
Issue 10/06
Operating Instructions
6SE6400-5AW00-0BP0