Fig. 3-16 Changing Parameters Using The Bop; Changing Parameters Using The Operator Panel - Siemens MICROMASTER 440 Operating Instructions Manual

Issue 10/06
3.2.4

Changing parameters using the operator panel

The way that parameter P0719 can be changed will now be described; please use
this description as a basis when setting all of the other parameters using the BOP.
Changing P0004 – parameter filter function
1
Press
2
Press
Press
3
level
4
Press
required value
5 Press
the value
6
The user can only see the command parameters.
Changing an indexed parameter P0719 – selecting the command/frequency
setpoint
1
Press
2
Press
3
Press
4 Press
value
5 Press
value
6 Press
the value
7
Press
Press
8
display (the display which the customer has
defined)
Fig. 3-16
NOTE
The BOP sometimes display
means that the drive inverter is presently handling another higher-priority task.
MICROMASTER 440 Operating Instructions
6SE6400-5AW00-0BP0
Step
in order to access the parameter
until P0004 is displayed
in order to reach the parameter value
or in order to obtain the
to acknowledge the value and to save
Step
in order to access the parameter
until P0719 is displayed
in order to reach the parameter value
in order to display the currently set
or in order to obtain the required
to acknowledge the value and to save
until r0000 is displayed
in order to return to the operating
Changing parameters using the BOP
Result on the display
Result on the display
when changing parameter values. This
3 Functions
73