Siemens MICROMASTER 440 Operating Instructions Manual page 137

Issue 10/06
BICO parameterization
If the setting 99 (BICO) is entered into parameters P0701 – P0708, then the BICO
wiring is enabled for the appropriate digital input. The output parameter number of
the function (parameter, included in the parameter text BO) should be entered into
the command source (parameter which contains the code BI in the parameter text).
Example:
An ON/OFF1 command should be realized using digital input DIN1.
P0700 = 2
P0701 = 99
P0840 = 722.0
NOTE
Only experienced users should use the BICO parameterization and for applications
where the possibilities provided by P0701 – P0708 are no longer adequate.
MICROMASTER 440 Operating Instructions
6SE6400-5AW00-0BP0
Control enabled via digital inputs
BICO enabled for DIN1
ON/OFF1 via DIN1
3 Functions
137