Loading Supplies - Avery Dennison Monarch 9855 Operator's Handbook Manual

L O A D I N G S U P P L I E S
This chapter describes how to load:
♦ a roll of supply
♦ fan-fold supply
♦ a roll of tag supply.
There are three types of supplies:
Thermal Direct
Thermal Transfer
High Energy
If you are using thermal direct supplies, do not load a ribbon.
If you switch from black mark to die cut supplies, make sure the printer's
supply type is set correctly. See
information. Your System Administrator can also send the supply setup
packet to change the supply type. Refer to the optional Packet Reference
Manual for more information about sending the supply setup packet.
specially treated thermal supplies that do not use a
ribbon for printing.
standard supplies that require a ribbon for printing.
scratch, chemical, and temperature resistant supplies
that require a ribbon able to withstand high
temperatures. See
Chapter 3 for more information.
"Supply
"Using a High Energy
Type" in Chapter 4 for more

Loading Supplies 2-1

2
Ribbon" in