On compressors with an Elektronikon® controller, unlock the emergency stop button (10) and press the
'Rset' key (5) before restarting.
Air filter
Especially if the compressor is installed in a dusty environment, inspect the air filter element regularly.
Replace when necessary. See also
Drains
Regularly check that condensate is discharged during operation. See section
amount of condensate depends on environmental and working conditions.
5.5
Checking the display
Procedure
78
Position of oil level sight-glass on GA 15 up to GA 22
Preventive maintenance schedule
Control panel of the Elektronikon® controller
Instruction book
for periodic replacement instructions.
Condensate
system. The
API459842