5.2
Before starting
Procedure
-
Check the oil level, top up if necessary. See section
5.3
Starting
Procedure
Step
Action
-
Open the air outlet valve.
-
Switch on the voltage. Check that voltage on LED (6) lights up.
-
Press start button (1) on the control panel. The compressor starts running and the automatic
operation LED (8) lights up. Ten seconds after starting, the drive motor switches over from star to
delta and the compressor starts running loaded.
76
For the position of the air outlet valve and the drain connections, see sections
and
Condensate system
Control panel Elektronikon®
Initial start-up.
Instruction book
Introduction
API459842